BTHomehub change wireless key to wep – older devices

0

BT’s Home Hub will not allow a connection via WEP which is required for older devices

To change this setting do the following:-

1. Open Internet Explorer
2. go to 192.168.1.254 to Open the Router Settings
3. Enter the Admin password as shown on the back of the Home Hub (removable card)
4. Click Advanced
5. Continue to Advanced Settings
6. Wireless
7. Change the Wireless Interface Type dropdown to 802 11 b/g
8. Click the radio circle to Enable WEP (64/40 bits) key
9. If no value, enter the value for Wireless Key (WEP) from the back of the router or leave the currecnt value

Change BT Home Hub to WEP

Now try reconnecting your device

Share.

About Author

Comments are closed.

Please note we do not accept any responsibility for errors occurring During Use of this site users follow instructions listed at their own risk.