Change MTU

0

Windows XP
From a wired or wirelessly connected device do the following:-
1. Click start –> (sometimes settings) –> Control Panel –> Network Connections
2. Double click on the active connection which will say connected underneath
3. Click Support
4. Click Details
5. Now the Default Gateway value is the IP Address of your modem/router
usually 192.168.0.1, 192.168.1.1 or 192.168.1.254
6. Note this value down
7. Click OK
8. Click OK or Close

9. Now open Internet Explorer
10. Enter http:// followed by your gateway address noted in 6. above
e.g. http://192.168.0.1
11. You will now have to enter a username and password
If the box has the username and password completed, then click OK
If there is no value for username try “admin” and for the password try one of the following “password”, “admin”,
Also try nothing for the username and “admin” for the password
Sometimes the value for these are written on the underneath of the router

On the left look for the WAN or WAN Setup in there should be a value for the MTU
type in your new value and click “Save” or “Apply”

Share.

About Author

Comments are closed.

Please note we do not accept any responsibility for errors occurring During Use of this site users follow instructions listed at their own risk.