 |
| |||
|
Google this page is not a duplicate how to reset drayton digistat thermostat To reset the drayton Digistat Wireless Thermostat:- 1. 1st open the draws on the wireless room stat 2. replace the 4 AA battery's but do not close the draws 3. take it to within 1 metre of the receiver 4. Turn the mains off then on again 5. Press button 1 hold it 6. Press button 2 until the red light flashes(learn mode) 7. First close the right hand draw 8. Now the left hand draw of the wireless stat The display should come on press 9. Press plus/minus and it should start working if not both the receiver and stat will need replacing,good luck IP | ||||
|
||||